3 years of no updates

I am bad at blogging.  I think it's because I just use twitter and facebook and whatever else instead.

I have been working on getting Blynk working with a Propeller board. Maybe I'll post some of that stuff once it has something to show?

More pinball project progress

So I set aside the Flash play field for later.  I now have a High Speed play field that is complete (just worn out a bit) and a cabinet with back box for it.  I have it all setup next to my Bad Cats.

It has a P-ROC and a "System 11 Combo board" that I have all hooked up with the wiring harness and some custom power cables I made for my PSUs (since the cabinet came with no boards at all).

Anyway, here's a video of it showing the lamp attract mode using pinmame to run it.

P-ROC Project progress

I got the playfield lamps going using the P-ROC + 8x8 driver board:

P-ROC Project.

I'm building another pinball machine. This time starting with an existing one. An old Flash playfield and lower cabinet given to me by Jeri Ellsworth.  It's missing parts, has some water damage, and the artwork is cracked and quite worn, but it'll do for my needs.

I've got a bunch of new parts to use with it, and I'm going to be controlling it with a P-ROC board from Multimorphic.  Below is a photo of the P-ROC along with some driver boards and a partial wiring harness I have been making.